This is the central element of the system, providing management and administration for the entire installation. Only one unit is required when operating in single mode. The system can be configured in a Primary/Secondary server mode; in this configuration, if one server fails, operation is automatically redirected to the backup (second) server. The server software can also be installed on local virtual servers owned by the customer, subject to consultation with ZPT Vigantice spol. s r.o.

Technical specifications:

Dimensions: 119 mm x 245 mm x 245 mm

Installation options:

Daisy Chain Topology (Serial Connection):
It is simple and highly efficient in terms of wiring. Devices are connected sequentially, ensuring a clear network structure. Major advantages include low cabling and installation costs, combined with easy-to-understand wiring. This topology is ideal for smaller or segmented networks (such as individual hospital wards). It allows for rapid deployment without complex configuration and delivers reliable operation when properly designed. Cable routing is highly organized, and the performance is fully sufficient for MDC V04 IP applications. Due to its simplicity, it offers highly practical deployment.

Star Topology

This topology is widely used, especially in modern computer networks. All devices connect to a central element, typically a switch or a router. As a result, the network is well-organized and clearly structured. Key benefits include easy management and maintenance. A failure of a single device usually does not affect the rest of the network, and expanding the network is technically straightforward. Disadvantages include higher cable consumption, and the entire system depends on the central element; its failure can lead to a complete network outage. Initial procurement costs may also be higher.

Hybrid Star-Serial Topology

This configuration combines the advantages of both approaches. It is most frequently used in larger or complex network infrastructures. Central elements can be configured in a star layout, while smaller network segments are connected in a daisy chain. Such a solution increases network design flexibility and allows for efficient cabling savings in specific sections. At the same time, it maintains clarity and easy management of the main nodes. The network can be expanded gradually without major modifications. The hybrid topology adapts better to specific site requirements, making it highly practical for real-world deployment.

Expansion:

Analog VoIP gateway IP – AVB IP (110810) -  ensures the interconnection of the system with public telephone networks.

GSM gateway SMS IP Acrios – GSM SMS IP (110852) ensures the interconnection of the MDC V04 IP system with the GSM network.

Converter for fire alarm IP – KEPS IP (110580) – provides interfacing between the Fire Alarm System (FAS) and the MediCall system.

Audio program module IP -  MAP IP (110520)  -  serves as a source for entertainment programming (2 FM channels) distributed into the system.

This unit is designed for use in bathrooms and toilets (if not part of a patient room) or in staff common rooms where acoustic signal transmission from the system is required.

Functional options:

• Emergency call activation.
• Staff registration capability.
• Staff alarm activation.
• Connection of emergency call push buttons and pull cords (maximum 8 units + 1 SV IP).
• Acoustic signal redirection upon staff registration.
• Wireless button communication capability – SIJB IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
SIJ RFID IP (110250) – Signalling unit with RFID IP
SIJB IP (110251) – Signalling unit wireless IP
SIJB RFID IP (110251) – Signalling unit wireless with RFID IP
SIJB IP (110252) – Signalling unit wireless 869 S IP
SIJB RFID IP (110252) Signalling unit wireless 869 S with RFID IP

This device is used for wireless initiation of emergency calls. It is particularly suitable for cases where the client moves freely around the room or ward but must be able to summon staff at any time (e.g., in the event of sudden indisposition).

The staff version is designed to summon assistance in the event of an assault on staff members.

Technical specifications:

Dimensions: 55mm x 45mm x 15mm

Available versions:
BTU IP (110361) – Wireless push button IP on the neck
BTU IP (110361) – Wireless push button IP with clip
BTU IP (110362) – Wireless push button 869 S IP
BTU IP (110362) – Wireless push button 869 S IP on the neck
BTU IP (110362) – Wireless push button 869 S IP with clip
BTUM IP (110363) – Wireless push button 869 S multi IP
BTUM IP (110363) – Wireless push button 869 S multi IP on the neck
BTUM IP (110363) – Wireless push button 869 S multi IP with clip

This unit is installed at the ward entrance doors and is primarily intended for visitors.

Functional options:

• Option to send a call request to staff.
  • Establishment of voice calls.

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions: VKJ RFID IP (110281) Entrance communication unit with RFID IP

Required components:

OEZ IP (110470) – Electric lock controller IP

This unit is used to provide power for the electric lock control. It must be installed exclusively in indoor environments.

Dimensions: 46mm x 26mm x 30 mm

This unit is used to transmit video from a required location to the Staff terminal IP. It is typically installed at ward or building entrance doors, usually in combination with the Entrance communication unit IP.

Technical specifications:

Dimensions : depending on the selected type

Available versions:

SK OUT IP (110651) – Outdoor camera set IP

The system automatically forwards information regarding the passage of any individual included in the MDC V04 IP tracking database. This information is directed to a designated staff station.

Technical specifications:

Dimensions : depending on the selected type

This element monitors individuals unauthorizedly leaving a given sector or building. The signal is transmitted to the Staff terminal display or to units with activated staff presence. The signal can be deactivated using a cancel button on the given unit located near the passageway. The unit allows for the connection of an infrared barrier to detect passage through the given sector, a door contact, and an antenna to detect elements (most commonly BTU IP) designed for egress monitoring.

Technical specifications:

Dimensions: 150mm x 86mm x 27mm

This handset-shaped unit is designed for bedside placement. It connects to the system via a connector on the Bedside unit bracket with connector IP (standard version) or via the User's socket IP when installed in bed head units (in which case a Bedside unit bracket without connector IP is included).

Functional options:

• Initiating request and establishing voice communication with nurses and auxiliary staff.
• Selection and listening to various entertainment programs.
• Channel switching and volume control for entertainment programs.
• Establishment of voice calls.
• Receiving telephone calls from the public switched telephone network (PSTN).
• Integrated accelerometer for automatic switching between hands-free and private call modes.
• Backlit buttons for enhanced client orientation.

Technical specifications:

Dimensions:
54mm x 200mm x 25mm (LJ IP)

Expansion:

DK (110876): Cable holder designed for mounting on the bed trapeze bar.

Available versions:
LJA IP (110118) – Bedside unit with accelerometer IP

LJO IP (110117) – Bedside unit with lighting control IP
LJS IP (110119) – Bed unit with capacitive sensor IP
LJOA IP (110101) – Bedside unit with lighting control and accelerometer IP

This handset-shaped unit is designed for bedside placement. It connects to the system via a connector on the Bedside unit bracket with connector IP (standard version) or via the User's socket IP when installed in bed head units (in which case a Bedside unit bracket without connector IP is included).

The LJD IP unit allows for the control of bedhead or room lighting, facilitated by the Relay module for lighting IP (110115).

The integrated speaker enables audio streaming from the TV, with the connection between the TV audio interface and the MDC V04 IP system managed by the TV Interface IP (110160).

Functional options:

• Initiating request and establishing voice communication.
• Selection and listening to various entertainment programs.
• Channel switching and volume control for entertainment programs.
• Display showing date, time, and current entertainment channel.

• Establishment of voice calls.
• Receiving telephone calls from the public switched telephone network (PSTN).
• Control of bedhead unit lighting.

Technical specifications:

Dimensions:
54mm x 200mm x 25mm (LJD IP)

Expansion:

DK (110876): Cable holder designed for mounting on the bed trapeze bar.

Used for connecting the Call cord IP or for connecting the Bedside unit IP within a bed head unit.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions: ZUO IP (110191) – User´s socket with lighting control IP

This device features an integrated speaker for one-way voice communication towards the client and a connector for connecting client-side components. It is primarily designed for the social care sector, where its application significantly reduces system acquisition costs.

Functional options :

• Loud one-way voice communication.
• Option to connect a Bedside unit IP for discrete two-way voice communication via a connector.
• Option to connect a call cord via a connector.
• Connectivity for emergency call push-buttons and pull cords.
• Loud reproduction of messages from Staff terminals and Staff units with display.
• Staff registration.
• Volume control and listening to various entertainment programs.
• Control of the overdoor lamp.

This device features an  integrated speaker for one-way voice communication  towards the client and a connector for connecting client-side components.

Functional options:

• Loud one-way voice communication.

• Option to connect a Bedside unit IP for discrete two-way voice communication via a connector.
• Option to connect a call cord with a microphone for hands-free two-way communication.
• Option to connect a call cord via a connector.
• Loud playback of entertainment programs.
• Loud reproduction of messages from Staff terminals and Staff units with display.
• Bedside unit hang-up detection.

 Technical specifications:

Dimensions: 150mm x 86mm x 45mm

Available versions:
ZLJR DIN IP (110124) – LJ bracket with loudspeaker DIN IP
ZLJRO IP (110126) – LJR bracket with lighting control IP

Enables the connection of a Bedside unit IP  with a cradle/mounting bracket, or a Call cord IP  via a connector.

Technical specifications:

Dimensions: 86mm x 150mm x 45mm

Available versions:
ZLJKE IP (110121) – LJ bracket with ethernet IP

ZLJ IP (110131) – LJ bracket without connector IP

This is a third-party component equipped with a wireless module. The module enables the device to be paired with components of the MDC V04 IP system equipped with an internal wireless receiver module.

Dimensions: 1100 mm x 700 mm

This system solution integrates the MDC V04 IP system with the SafeBed device, which is designed to detect when a patient leaves the bed. The device is connected to the MDC V04 IP system by cable via the ZEZ IP (110481) or wirelessly using the ZVSB IP (110153). When the patient leaves the bed, the signal is transmitted to the MDC V04 IP system as an emergency call.

This five-color signaling element, in conjunction with a connected unit, provides visual status indication for a specific location.

Technical specifications:

Dimensions: 86mm x 86mm x 48mm

A user-friendly device with a high-resolution 7” or 10” touchscreen display that seamlessly integrates the emergency nurse call system with health and nursing care management.

Functional options:

• Emergency call activation.
• Activation of the emergency medical alarm (Blue Alarm).
• Staff registration via RFID, password, etc.
• Electric door lock control.
• Signal reception from wireless BTU buttons (integrated BT module).
• Entertainment program playback.
• Logging of social care activities into the client database directly in the room (compatible with third-party software, e.g., Iresoft - CYGNUS).
• Integrated reminder settings.
• Client information display (e.g., daily menu, visiting hours, hygiene protocols, etc.).
• Predefined messaging to auxiliary staff (e.g., bedding change required).

 Technical specifications:

Dimensions: 278mm x 205mm x 30mm

Available versions:

KT7 IP  (110203)  Communication terminal 7″ IP    Dimensions: 210mm x 168mm x 30mm

KTK10 IP (110204) Communication terminal 10"with connector IP

KTK7 IP (110205) - Communication terminal 7" with connector IP

KT10 IP (110206) - Communication terminal 10" 869 S IP

A unit integrating controls for both clients and staff. It is typically installed at the room entrance.

Functional options:

• Nurse and auxiliary staff registration (via RFID card or button).
• Electric door lock control.
• Request for a voice connection with a nurse.
• Hands-free (loudspeaker) voice communication with staff
• Connection of a bed unit for discrete communication via the KJ connector (for versions equipped with a connector).
• Connection of a call-cord via the KJ connector (for versions equipped with a connector).
• Call reception and two-way communication with other system units.
• Staff alarm activation.
• Connection of emergency call push-buttons and pull cords via the SBUS.
• Intercommunication with all communication devices within the system.
• Loud reproduction of announcements from the Staff Terminal IP to the room or via central messages to the entire ward.
• Acoustic signaling for all calls from other system locations and systems within a combined operation, with independent volume settings on each device.
• Control of the overdoor lamp.
• Customizable expansion with an RFID module and wireless receiver module (125 kHz variants, or the 13.56 MHz NXP Mifare DESFire EV3 variant).

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJ RFID IP (110340) Communication unit with RFID IP
KJK IP (110311) Communication unit with connector IP
KJB IP (110342) Communication unit wireless IP
KJB RFID IP (110342) Communication unit wireless with RFID IP
KJKB IP (110313) Communication unit with connector wireless IP
KJKB RFID IP (110313) Communication unit with connector wireless with RFID IP
KJB IP (110343) Communication unit wireless 869 S IP
KJB RFID IP (110343) Communication unit wireless 869 S with RFID IP

Compared to the Communication unit IP, this model features a color graphic display that provides detailed identification for individual calls, including the exact address of call activation, call type, description of the call point, the client's name, and staff registration status. The unit can be optionally expanded with an RFID module and a wireless receiver module. It can also serve as a substitute for a Staff unit with display IP.

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJD RFID IP (110350) Communication unit with display and RFID IP
KJDB IP (110351) Communication unit with display wireless IP
KJDB RFID IP (110351) Communication unit with display wireless with RFID IP
KJDB IP (110352) Communication unit with display wireless 869 S IP
KJDB RFID IP (110352) Communication unit with display wireless 869 S with RFID IP

This unit is designed for use in bathrooms and toilets (if not part of a patient room) or in staff common rooms where acoustic signal transmission from the system is required.

Functional options:

• Emergency call activation.
• Staff registration capability.
• Staff alarm activation.
• Connection of emergency call push buttons and pull cords (maximum 8 units + 1 SV IP).
• Acoustic signal redirection upon staff registration.
• Wireless button communication capability – SIJB IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
SIJ RFID IP (110250) – Signalling unit with RFID IP
SIJB IP (110251) – Signalling unit wireless IP
SIJB RFID IP (110251) – Signalling unit wireless with RFID IP
SIJB IP (110252) – Signalling unit wireless 869 S IP
SIJB RFID IP (110252) Signalling unit wireless 869 S with RFID IP

Compared to the Signaling unit IP, this model features a display that provides detailed identification for individual calls, including the exact address of call activation, call type, description of the call point, the client's name, and staff registration status.

Technical specifications:

Dimensions: 86mm x 150mm x 27mm

Available versions:
SIJD RFID IP (110260) – Signalling unit with display and RFID IP
SIJDB IP (110261) – Signalling unit with display wireless IP
SIJDB RFID IP (110261) – Signalling unit with display wireless with RFID IP

SIJDB RFID IP (110262) – Signalling unit with display wireless 869 S with RFID IP

This element ensures the integration of the TV interface audio with the MDC V04 IP system.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

This device is a switch on a coiled cord that connects via a connector to the following units or their variants: ZLJK IP, ZU IP, ZVST IP, ZUR IP, ZLJR IP, and KJK IP. The function of the switch is analogous to a call button. The button features permanent double-sided backlighting for better visibility in low-light conditions. To protect client end-point devices from mechanical damage, non-destructive connectors can be used. These connectors are designed to be safely disconnected under excessive force without sustaining damage.

Technical specifications:

Dimensions: 40mm x 84mm x 27mm

Expansion:

DK (110876) - Cable holder designed for mounting on the bed trapeze bar

ZVS (102320) - Call cord bracket

ZVSZ (109500) – Call cord bracket for ZLJ

Available versions: VSB IP (110153) – Call Cord for ZVSB IP

This device is a switch on a coiled cord with a built-in microphone, which connects via a connector to ZLJR IP or KJK IP units. It enables the user to initiate call requests and conduct voice communication with staff utilizing the speaker of the connected units.

Technical specifications:

Dimensions: 40x84x27 mm + coiled cord

Expansion:

DK (110876) - Cable holder designed for mounting on the bed trapeze bar

ZVS (102320) – Call cord bracket

ZVSZ (109500) – Call cord bracket for ZLJ

This device features an  integrated speaker for one-way voice communication  towards the client and a connector for connecting client-side components.

Functional options:

• Loud one-way voice communication.

• Option to connect a Bedside unit IP for discrete two-way voice communication via a connector.
• Option to connect a call cord with a microphone for hands-free two-way communication.
• Option to connect a call cord via a connector.
• Loud playback of entertainment programs.
• Loud reproduction of messages from Staff terminals and Staff units with display.
• Bedside unit hang-up detection.

Technical specifications:

Dimensions: 150mm x 86mm x 45mm

Available versions:
ZLJR DIN IP (110124) – LJ bracket with loudspeaker DIN IP
ZLJRO IP (110126) – LJR bracket with lighting control IP

Used for connecting the Call cord IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
ZVSB IP (110166) – Socket for call cord wireless IP
ZVSB IP (110167) – Socket for call cord wireless 869 S IP

This device is used for wireless initiation of emergency calls. It is particularly suitable for cases where the client moves freely around the room or ward but must be able to summon staff at any time (e.g., in the event of sudden indisposition).

The staff version is designed to summon assistance in the event of an assault on staff members.

Technical specifications:

Dimensions: 55mm x 45mm x 15mm

Available versions:
BTU IP (110361) – Wireless push button IP on the neck
BTU IP (110361) – Wireless push button IP with clip
BTU IP (110362) – Wireless push button 869 S IP
BTU IP (110362) – Wireless push button 869 S IP on the neck
BTU IP (110362) – Wireless push button 869 S IP with clip
BTUM IP (110363) – Wireless push button 869 S multi IP
BTUM IP (110363) – Wireless push button 869 S multi IP on the neck
BTUM IP (110363) – Wireless push button 869 S multi IP with clip

This element provides the physical interconnection of external devices, such as sensor mats, beds, etc.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

This is a third-party component equipped with a wireless module. The module enables the device to be paired with components of the MDC V04 IP system equipped with an internal wireless receiver module.

Dimensions: 1100 mm x 700 mm

This system solution connects the MDC V04 IP system with the SafeBed device intended for bed-exit detection. The device is connected to the MDC V04 IP system by cable using ZEZ IP (110481) or wirelessly using ZVSB IP (110153). After the patient leaves the bed, the signal is passed to the MDC V04 IP system as an emergency call.

This device is used for wireless initiation of emergency calls. It is particularly suitable for cases where the client moves freely around the room or ward but must be able to summon staff at any time (e.g., in the event of sudden indisposition).

The staff version is designed to summon assistance in the event of an assault on staff members.

Technical specifications:

Dimensions: 55mm x 45mm x 15mm

Available versions:
BTU IP (110361) – Wireless push button IP on the neck
BTU IP (110361) – Wireless push button IP with clip
BTU IP (110362) – Wireless push button 869 S IP
BTU IP (110362) – Wireless push button 869 S IP on the neck
BTU IP (110362) – Wireless push button 869 S IP with clip
BTUM IP (110363) – Wireless push button 869 S multi IP
BTUM IP (110363) – Wireless push button 869 S multi IP on the neck
BTUM IP (110363) – Wireless push button 869 S multi IP with clip

A user-friendly device with a high-resolution 7” or 10” touchscreen display that seamlessly integrates the emergency nurse call system with health and nursing care management.

Functional options:

• Emergency call activation.
• Activation of the emergency medical alarm (Blue Alarm).
• Staff registration via RFID, password, etc.
• Electric door lock control.
• Signal reception from wireless BTU buttons (integrated BT module).
• Entertainment program playback.
• Logging of social care activities into the client database directly in the room (compatible with third-party software, e.g., Iresoft - CYGNUS).
• Integrated reminder settings.
• Client information display (e.g., daily menu, visiting hours, hygiene protocols, etc.).
• Predefined messaging to auxiliary staff (e.g., bedding change required).

 Technical specifications:

Dimensions: 278mm x 205mm x 30mm

Available versions:

KT7 IP  (110203)  Communication terminal 7″ IP    Dimensions: 210mm x 168mm x 30mm

KTK10 IP (110204) Communication terminal 10"with connector IP

KTK7 IP (110205) - Communication terminal 7" with connector IP

KT10 IP (110206) - Communication terminal 10" 869 S IP

A unit integrating controls for both clients and staff. It is typically installed at the room entrance.

Functional options:

• Nurse and auxiliary staff registration (via RFID card or button).
• Electric door lock control.
• Request for a voice connection with a nurse.
• Hands-free (loudspeaker) voice communication with staff
• Connection of a bed unit for discrete communication via the KJ connector (for versions equipped with a connector).
• Connection of a call-cord via the KJ connector (for versions equipped with a connector).
• Call reception and two-way communication with other system units.
• Staff alarm activation.
• Connection of emergency call push-buttons and pull cords via the SBUS.
• Intercommunication with all communication devices within the system.
• Loud reproduction of announcements from the Staff Terminal IP to the room or via central messages to the entire ward.
• Acoustic signaling for all calls from other system locations and systems within a combined operation, with independent volume settings on each device.
• Control of the overdoor lamp.
• Customizable expansion with an RFID module and wireless receiver module (125 kHz variants, or the 13.56 MHz NXP Mifare DESFire EV3 variant).

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJ RFID IP (110340) Communication unit with RFID IP
KJK IP (110311) Communication unit with connector IP
KJB IP (110342) Communication unit wireless IP
KJB RFID IP (110342) Communication unit wireless with RFID IP
KJKB IP (110313) Communication unit with connector wireless IP
KJKB RFID IP (110313) Communication unit with connector wireless with RFID IP
KJB IP (110343) Communication unit wireless 869 S IP
KJB RFID IP (110343) Communication unit wireless 869 S with RFID IP

Compared to the Communication unit IP, this model features a color graphic display that provides detailed identification for individual calls, including the exact address of call activation, call type, description of the call point, the client's name, and staff registration status. The unit can be optionally expanded with an RFID module and a wireless receiver module. It can also serve as a substitute for a Staff unit with display IP.

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJD RFID IP (110350) Communication unit with display and RFID IP
KJDB IP (110351) Communication unit with display wireless IP
KJDB RFID IP (110351) Communication unit with display wireless with RFID IP
KJDB IP (110352) Communication unit with display wireless 869 S IP
KJDB RFID IP (110352) Communication unit with display wireless 869 S with RFID IP

This unit is designed for use in bathrooms and toilets (if not part of a patient room) or in staff common rooms where acoustic signal transmission from the system is required.

Functional options:

• Emergency call activation.
• Staff registration capability.
• Staff alarm activation.
• Connection of emergency call push buttons and pull cords (maximum 8 units + 1 SV IP).
• Acoustic signal redirection upon staff registration.
• Wireless button communication capability – SIJB IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
SIJ RFID IP (110250) – Signalling unit with RFID IP
SIJB IP (110251) – Signalling unit wireless IP
SIJB RFID IP (110251) – Signalling unit wireless with RFID IP
SIJB IP (110252) – Signalling unit wireless 869 S IP
SIJB RFID IP (110252) Signalling unit wireless 869 S with RFID IP

Compared to the Signaling unit IP, this model features a display that provides detailed identification for individual calls, including the exact address of call activation, call type, description of the call point, the client's name, and staff registration status.

Technical specifications:

Dimensions: 86mm x 150mm x 27mm

Available versions:
SIJD RFID IP (110260) – Signalling unit with display and RFID IP
SIJDB IP (110261) – Signalling unit with display wireless IP
SIJDB RFID IP (110261) – Signalling unit with display wireless with RFID IP

SIJDB RFID IP (110262) – Signalling unit with display wireless 869 S with RFID IP

This five-color signaling element, in conjunction with a connected unit, provides visual status indication for a specific location.

Technical specifications:

Dimensions: 86mm x 86mm x 48mm

This element, in conjunction with the Signaling unit IP,  the User’s bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVB IP (110414) — Emergency call push button wireless IP

This unit, in conjunction with the Signaling Unit IP, the Communication Unit IP, the User’s  Bracket Unit with Loudspeaker IP, or their variants, allows emergency calls to be sent to the system. It is primarily used in bathrooms and toilets, installed near toilets and washbasins. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Rozměr: 86mm x 86mm x 27mm

Available versions:

TTNVB IP (110415) — Emergency call pull cord with push button wireless IP

This unit is installed in bathrooms and toilets associated with a patient room. It is used when the cancellation of an emergency call is required at the point of origin.

Technical specifications:

Dimensions : 86mm x 86mm x27mm

This element, in conjunction with the Signaling unit IP,  the User’s bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVB IP (110414) — Emergency call push button wireless IP

This unit, in conjunction with the Signaling Unit IP, the Communication Unit IP, the User’s  Bracket Unit with Loudspeaker IP, or their variants, allows emergency calls to be sent to the system. It is primarily used in bathrooms and toilets, installed near toilets and washbasins. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Rozměr: 86mm x 86mm x 27mm

Available versions:

TTNVB IP (110415) — Emergency call pull cord with push button wireless IP

This unit is installed in bathrooms and toilets associated with a patient room. It is used when the cancellation of an emergency call is required at the point of origin.

Technical specifications:

Dimensions : 86mm x 86mm x27mm

This element, in conjunction with the Signaling unit IP,  the User’s bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVB IP (110414) — Emergency call push button wireless IP

This unit is the functional equivalent of the Emergency call push button IP. It is designed for installation in bathrooms above bathtubs and in showers, at a minimum height of 2.25 m above the floor. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
TANVB IP (110412) Emergency Call Pull Cord Wireless IP
TANVB IP (110413) Emergency Call Pull Cord Wireless 869 S IP

This unit, in conjunction with the Signaling Unit IP, the Communication Unit IP, the User’s  Bracket Unit with Loudspeaker IP, or their variants, allows emergency calls to be sent to the system. It is primarily used in bathrooms and toilets, installed near toilets and washbasins. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Rozměr: 86mm x 86mm x 27mm

Available versions:

TTNVB IP (110415) — Emergency call pull cord with push button wireless IP

This unit is used for connecting the Pneumatic switch of emergency call IP (110420) – a component consisting of a bulb and a hose for pneumatic membrane switch operation. It is specifically designed for use in extremely wet environments, such as spa or rehabilitation baths.

In conjunction with the Signaling unit IP, the User’s bracket unit with loudspeaker IP, or the Communication unit IP, it allows emergency calls to be sent to the system.

The unit is installed above or beside the bathtub, or wherever required.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Required components:

PS IP (110420) Pneumatic switch of emergency call IP

Funkční možnosti prvku: 

• Pro ovládání el. zámku RFID kartou v případě, kdy se nepožaduje hlasová komunikace, např. zabezpečení skladu léčiv apod. 
• Ve spojení s VKJ IP v případech, kdy vstupní dveře jsou z obou stran opatřeny koulí (nikoliv klikou). Zde je nutno pro otevření dveří použít RFID karty jak z venku tak zevnitř. 
• Ovladač el. zámku, potažmo pak vlastní el. zámek, je pak připojen k VKJ IP a tento je ovládán jak při přiložení RFID karty ke čtečce VKJ IP, tak při přiložení karty k CRFID, přičemž příslušnou logickou vazbu zajišťuje server na základě konkrétní konfigurace. 

 Technické parametry:  

Rozměr: 86mm x 86mm x 27mm 

This five-color signaling element, in conjunction with a connected unit, provides visual status indication for a specific location.

Technical specifications:

Dimensions: 86mm x 86mm x 48mm

This element, in conjunction with the Signaling unit IP,  the User's bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVBIP IP (110414) - Emergency call push button wireless IP

This unit, in conjunction with the Signaling Unit IP, the Communication Unit IP, the User's  Bracket Unit with Loudspeaker IP, or their variants, allows emergency calls to be sent to the system. It is primarily used in bathrooms and toilets, installed near toilets and washbasins. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Rozměr: 86mm x 86mm x 27mm

Available versions:

TTNVB IP (110415) - Emergency call pull cord with push button wireless IP

This unit is installed in bathrooms and toilets associated with a patient room. It is used when the cancellation of an emergency call is required at the point of origin.

Technical specifications:

Dimensions : 86mm x 86mm x27mm

A unit integrating controls for both clients and staff. It is typically installed at the room entrance.

Functional options:

• Nurse and auxiliary staff registration (via RFID card or button).
• Electric door lock control.
• Request for a voice connection with a nurse.
• Hands-free (loudspeaker) voice communication with staff
• Connection of a bed unit for discrete communication via the KJ connector (for versions equipped with a connector).
• Connection of a call-cord via the KJ connector (for versions equipped with a connector).
• Call reception and two-way communication with other system units.
• Staff alarm activation.
• Connection of emergency call push-buttons and pull cords via the SBUS.
• Intercommunication with all communication devices within the system.
• Loud reproduction of announcements from the Staff Terminal IP to the room or via central messages to the entire ward.
• Acoustic signaling for all calls from other system locations and systems within a combined operation, with independent volume settings on each device.
• Control of the overdoor lamp.
• Customizable expansion with an RFID module and wireless receiver module (125 kHz variants, or the 13.56 MHz NXP Mifare DESFire EV3 variant).

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJ RFID IP (110340) Communication unit with RFID IP
KJK IP (110311) Communication unit with connector IP
KJB IP (110342) Communication unit wireless IP
KJB RFID IP (110342) Communication unit wireless with RFID IP
KJKB IP (110313) Communication unit with connector wireless IP
KJKB RFID IP (110313) Communication unit with connector wireless with RFID IP
KJB IP (110343) Communication unit wireless 869 S IP
KJB RFID IP (110343) Communication unit wireless 869 S with RFID IP

This unit is designed for use in bathrooms and toilets (if not part of a patient room) or in staff common rooms where acoustic signal transmission from the system is required.

Functional options:

• Emergency call activation.
• Staff registration capability.
• Staff alarm activation.
• Connection of emergency call push buttons and pull cords (maximum 8 units + 1 SV IP).
• Acoustic signal redirection upon staff registration.
• Wireless button communication capability – SIJB IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
SIJ RFID IP (110250) – Signalling unit with RFID IP
SIJB IP (110251) – Signalling unit wireless IP
SIJB RFID IP (110251) – Signalling unit wireless with RFID IP
SIJB IP (110252) – Signalling unit wireless 869 S IP
SIJB RFID IP (110252) Signalling unit wireless 869 S with RFID IP

This unit is installed in bathrooms and toilets associated with a patient room. It is used when the cancellation of an emergency call is required at the point of origin.

Technical specifications:

Dimensions : 86mm x 86mm x27mm

This element, in conjunction with the Signaling unit IP,  the User's bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVBIP IP (110414) - Emergency call push button wireless IP

This unit is the functional equivalent of the Emergency call push button IP. It is designed for installation in bathrooms above bathtubs and in showers, at a minimum height of 2.25 m above the floor. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
TANVB IP (110412) Emergency Call Pull Cord Wireless IP
TANVB IP (110413) Emergency Call Pull Cord Wireless 869 S IP

This unit, in conjunction with the Signaling Unit IP, the Communication Unit IP, the User's  Bracket Unit with Loudspeaker IP, or their variants, allows emergency calls to be sent to the system. It is primarily used in bathrooms and toilets, installed near toilets and washbasins. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Rozměr: 86mm x 86mm x 27mm

Available versions:

TTNVB IP (110415) - Emergency call pull cord with push button wireless IP

This unit is used for connecting the Pneumatic switch of emergency call IP (110420) – a component consisting of a bulb and a hose for pneumatic membrane switch operation. It is specifically designed for use in extremely wet environments, such as spa or rehabilitation baths.

In conjunction with the Signaling unit IP, the User's bracket unit with loudspeaker IP, or the Communication unit IP, it allows emergency calls to be sent to the system.

The unit is installed above or beside the bathtub, or wherever required.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Required components:

PS IP (110420) Pneumatic switch of emergency call IP

This five-color signaling element, in conjunction with a connected unit, provides visual status indication for a specific location.

Technical specifications:

Dimensions: 86mm x 86mm x 48mm

This device is used for wireless initiation of emergency calls. It is particularly suitable for cases where the client moves freely around the room or ward but must be able to summon staff at any time (e.g., in the event of sudden indisposition).

The staff version is designed to summon assistance in the event of an assault on staff members.

Technical specifications:

Dimensions: 55mm x 45mm x 15mm

Available versions:
BTU IP (110361) – Wireless push button IP on the neck
BTU IP (110361) – Wireless push button IP with clip
BTU IP (110362) – Wireless push button 869 S IP
BTU IP (110362) – Wireless push button 869 S IP on the neck
BTU IP (110362) – Wireless push button 869 S IP with clip
BTUM IP (110363) – Wireless push button 869 S multi IP
BTUM IP (110363) – Wireless push button 869 S multi IP on the neck
BTUM IP (110363) – Wireless push button 869 S multi IP with clip

A user-friendly device with a high-resolution 7” or 10” touchscreen display that seamlessly integrates the emergency nurse call system with health and nursing care management.

Functional options:

• Emergency call activation.
• Activation of the emergency medical alarm (Blue Alarm).
• Staff registration via RFID, password, etc.
• Electric door lock control.
• Signal reception from wireless BTU buttons (integrated BT module).
• Entertainment program playback.
• Logging of social care activities into the client database directly in the room (compatible with third-party software, e.g., Iresoft - CYGNUS).
• Integrated reminder settings.
• Client information display (e.g., daily menu, visiting hours, hygiene protocols, etc.).
• Predefined messaging to auxiliary staff (e.g., bedding change required).

 Technical specifications:

Dimensions: 278mm x 205mm x 30mm

Available versions:

KT7 IP  (110203)  Communication terminal 7″ IP    Dimensions: 210mm x 168mm x 30mm

KTK10 IP (110204) Communication terminal 10"with connector IP

KTK7 IP (110205) - Communication terminal 7" with connector IP

KT10 IP (110206) - Communication terminal 10" 869 S IP

A unit integrating controls for both clients and staff. It is typically installed at the room entrance.

Functional options:

• Nurse and auxiliary staff registration (via RFID card or button).
• Electric door lock control.
• Request for a voice connection with a nurse.
• Hands-free (loudspeaker) voice communication with staff
• Connection of a bed unit for discrete communication via the KJ connector (for versions equipped with a connector).
• Connection of a call-cord via the KJ connector (for versions equipped with a connector).
• Call reception and two-way communication with other system units.
• Staff alarm activation.
• Connection of emergency call push-buttons and pull cords via the SBUS.
• Intercommunication with all communication devices within the system.
• Loud reproduction of announcements from the Staff Terminal IP to the room or via central messages to the entire ward.
• Acoustic signaling for all calls from other system locations and systems within a combined operation, with independent volume settings on each device.
• Control of the overdoor lamp.
• Customizable expansion with an RFID module and wireless receiver module (125 kHz variants, or the 13.56 MHz NXP Mifare DESFire EV3 variant).

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJ RFID IP (110340) Communication unit with RFID IP
KJK IP (110311) Communication unit with connector IP
KJB IP (110342) Communication unit wireless IP
KJB RFID IP (110342) Communication unit wireless with RFID IP
KJKB IP (110313) Communication unit with connector wireless IP
KJKB RFID IP (110313) Communication unit with connector wireless with RFID IP
KJB IP (110343) Communication unit wireless 869 S IP
KJB RFID IP (110343) Communication unit wireless 869 S with RFID IP

Compared to the Communication unit IP, this model features a color graphic display that provides detailed identification for individual calls, including the exact address of call activation, call type, description of the call point, the client's name, and staff registration status. The unit can be optionally expanded with an RFID module and a wireless receiver module. It can also serve as a substitute for a Staff unit with display IP.

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJD RFID IP (110350) Communication unit with display and RFID IP
KJDB IP (110351) Communication unit with display wireless IP
KJDB RFID IP (110351) Communication unit with display wireless with RFID IP
KJDB IP (110352) Communication unit with display wireless 869 S IP
KJDB RFID IP (110352) Communication unit with display wireless 869 S with RFID IP

This unit is designed for use in bathrooms and toilets (if not part of a patient room) or in staff common rooms where acoustic signal transmission from the system is required.

Functional options:

• Emergency call activation.
• Staff registration capability.
• Staff alarm activation.
• Connection of emergency call push buttons and pull cords (maximum 8 units + 1 SV IP).
• Acoustic signal redirection upon staff registration.
• Wireless button communication capability – SIJB IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
SIJ RFID IP (110250) – Signalling unit with RFID IP
SIJB IP (110251) – Signalling unit wireless IP
SIJB RFID IP (110251) – Signalling unit wireless with RFID IP
SIJB IP (110252) – Signalling unit wireless 869 S IP
SIJB RFID IP (110252) Signalling unit wireless 869 S with RFID IP

Compared to the Signaling unit IP, this model features a display that provides detailed identification for individual calls, including the exact address of call activation, call type, description of the call point, the client's name, and staff registration status.

Technical specifications:

Dimensions: 86mm x 150mm x 27mm

Available versions:
SIJD RFID IP (110260) – Signalling unit with display and RFID IP
SIJDB IP (110261) – Signalling unit with display wireless IP
SIJDB RFID IP (110261) – Signalling unit with display wireless with RFID IP

SIJDB RFID IP (110262) – Signalling unit with display wireless 869 S with RFID IP

This module serves as an audio source for entertainment programs distributed throughout the system. It features two built-in FM radio tuners. When used with a Microphone Numark (MIK 110874), the module enables audio from chapels or common rooms to be broadcast directly to patient rooms via Communication units (KJ IP) or Communication units with display (KJD IP).

Dimensions: 150 mm x 86 mm x 27 mm

This five-color signaling element, in conjunction with a connected unit, provides visual status indication for a specific location.

Technical specifications:

Dimensions: 86mm x 86mm x 48mm

This element, in conjunction with the Signaling unit IP,  the User's bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVBIP IP (110414) - Emergency call push button wireless IP

This unit is the functional equivalent of the Emergency call push button IP. It is designed for installation in bathrooms above bathtubs and in showers, at a minimum height of 2.25 m above the floor. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
TANVB IP (110412) Emergency Call Pull Cord Wireless IP
TANVB IP (110413) Emergency Call Pull Cord Wireless 869 S IP

This unit is installed in bathrooms and toilets associated with a patient room. It is used when the cancellation of an emergency call is required at the point of origin.

Technical specifications:

Dimensions : 86mm x 86mm x27mm

A unit integrating controls for both clients and staff. It is typically installed at the room entrance.

Functional options:

• Nurse and auxiliary staff registration (via RFID card or button).
• Electric door lock control.
• Request for a voice connection with a nurse.
• Hands-free (loudspeaker) voice communication with staff
• Connection of a bed unit for discrete communication via the KJ connector (for versions equipped with a connector).
• Connection of a call-cord via the KJ connector (for versions equipped with a connector).
• Call reception and two-way communication with other system units.
• Staff alarm activation.
• Connection of emergency call push-buttons and pull cords via the SBUS.
• Intercommunication with all communication devices within the system.
• Loud reproduction of announcements from the Staff Terminal IP to the room or via central messages to the entire ward.
• Acoustic signaling for all calls from other system locations and systems within a combined operation, with independent volume settings on each device.
• Control of the overdoor lamp.
• Customizable expansion with an RFID module and wireless receiver module (125 kHz variants, or the 13.56 MHz NXP Mifare DESFire EV3 variant).

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions:
KJ RFID IP (110340) Communication unit with RFID IP
KJK IP (110311) Communication unit with connector IP
KJB IP (110342) Communication unit wireless IP
KJB RFID IP (110342) Communication unit wireless with RFID IP
KJKB IP (110313) Communication unit with connector wireless IP
KJKB RFID IP (110313) Communication unit with connector wireless with RFID IP
KJB IP (110343) Communication unit wireless 869 S IP
KJB RFID IP (110343) Communication unit wireless 869 S with RFID IP

This unit is designed for use in bathrooms and toilets (if not part of a patient room) or in staff common rooms where acoustic signal transmission from the system is required.

Functional options:

• Emergency call activation.
• Staff registration capability.
• Staff alarm activation.
• Connection of emergency call push buttons and pull cords (maximum 8 units + 1 SV IP).
• Acoustic signal redirection upon staff registration.
• Wireless button communication capability – SIJB IP.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
SIJ RFID IP (110250) – Signalling unit with RFID IP
SIJB IP (110251) – Signalling unit wireless IP
SIJB RFID IP (110251) – Signalling unit wireless with RFID IP
SIJB IP (110252) – Signalling unit wireless 869 S IP
SIJB RFID IP (110252) Signalling unit wireless 869 S with RFID IP

This unit is the functional equivalent of the Emergency call push button IP. It is designed for installation in bathrooms above bathtubs and in showers, at a minimum height of 2.25 m above the floor. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
TANVB IP (110412) Emergency Call Pull Cord Wireless IP
TANVB IP (110413) Emergency Call Pull Cord Wireless 869 S IP

This unit is the functional equivalent of the Emergency call push button IP. It is designed for installation in bathrooms above bathtubs and in showers, at a minimum height of 2.25 m above the floor. A rubber cover ensures moisture resistance for use in humid environments.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:
TANVB IP (110412) Emergency Call Pull Cord Wireless IP
TANVB IP (110413) Emergency Call Pull Cord Wireless 869 S IP

This element, in conjunction with the Signaling unit IP,  the User's bracket unit with loudspeaker IP, or  Communication unit IP, allows emergency calls to be sent to the system. A rubber cover ensures moisture resistance for use in humid environments.

It is primarily used in  bathrooms and toilets, installed near toilets and washbasins.

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

Available versions:

TNVBIP IP (110414) - Emergency call push button wireless IP

This 32” information monitor is typically installed in corridors. It displays detailed information about individual calls, including the exact address of the call activation point, call type, location description, caller’s name, medical alarms, staff presence, and the current date and time.

Technical specifications:

Required components:

IIM IP (110540) Interface for information monitor IP  

This component provides the video feed for the  Information monitor 32".

(Dimensions: 86 mm x 150 mm x 27 mm)

It is used to facilitate staff orientation in complex buildings and areas. It visually indicates the direction from which a client call was initiated.

Technical specifications:

Dimensions : 86mm x 86mm x 48mm

This unit is installed at the ward entrance doors and is primarily intended for visitors.

Functional options:

• Option to send a call request to staff.
• Establishment of voice calls.

Technical specifications:

Dimensions: 130mm x 150mm x 27mm

Available versions: VKJ RFID IP (110281) Entrance communication unit with RFID IP

Required components:

OEZ IP (110470) – Electric lock controller IP

This unit is used to provide power for the electric lock control. It must be installed exclusively in indoor environments.

Dimensions: 46mm x 26mm x 30 mm

Technical specifications:

Dimensions: 86mm x 86mm x 27mm

This unit is used to transmit video from a required location to the Staff terminal IP. It is typically installed at ward or building entrance doors, usually in combination with the Entrance communication unit IP.

Technical specifications:

Dimensions : depending on the selected type

Available versions:

SK OUT IP (110651) – Outdoor camera set IP

The system automatically forwards information regarding the passage of any individual included in the MDC V04 IP tracking database. This information is directed to a designated staff station.

Technical specifications:

Dimensions : depending on the selected type

This element monitors individuals unauthorizedly leaving a given sector or building. The signal is transmitted to the Staff terminal display or to units with activated staff presence. The signal can be deactivated using a cancel button on the given unit located near the passageway. The unit allows for the connection of an infrared barrier to detect passage through the given sector, a door contact, and an antenna to detect elements (most commonly BTU IP) designed for egress monitoring.

Technical specifications:

Dimensions: 150mm x 86mm x 27mm

The Staff terminal IP is the central control and management unit of the entire system. It is designed for either desktop placement at a nurse station or wall-mounted installation. The device connects to the system bus via an Ethernet socket. The system supports the interconnection of multiple staff terminals into a combined operation. In this mode, the interconnected units function as a single integrated system, preserving full operational logic and all system features. This represents a significant technical advantage over conventional systems, which are typically limited to transmitting only acoustic signals in combined operation.  

Functional options:

• Acoustic and visual signaling for all individual calls.
• Visual identification of the calling address/location.
• Integrated voice navigation announcements to accelerate staff response times.
• Real-time display of client data and tracking of staff movement and registration on the ward.
• Detailed history logs of clients' calls and staff registrations.
• Remote control for electric door locks.
• System decentralization into smaller, independent logical units.
• User-friendly interface via a high-resolution 12” touchscreen.
• Call and alarm management with options to accept, cancel, or mute.

• Selection and management of entertainment channels.
• On-site editing of client s' names.

• Video monitoring integration for viewing system cameras.
• Client search and connection by name or room number for instant communication.
• Flexible firmware updates via a USB flash drive or the internet.
• Scalable architecture allowing for an unlimited number of Staff terminals IP (TP IP).
• Customizable settings for signaling volume and display backlight (Day/Night modes).
• Fault diagnostics with automatic signaling of disconnected system elements on the TP IP display.
• External power support via an adapter through the ZE IP element.
• Intelligent operation with automatic or manual Day/Night mode switching.
• Real-time display of staff presence in individual rooms.
• Desktop or wall-mounted design with adjustable tilt and rotation for optimal viewing.
• Optional integrated RFID reader for staff RFID card identification and configuration.

Technical specifications:

Dimensions: 360mm x 250mm x 120mm

Required components:

ZE IP (110030)- Ethernet socket IP – used to connect the desktop version of TP IP to the

                            system   

Available versions:
TP N IP (110016) – Wall staff terminal IP ACRIOS – wall-mounted version
TP RFID IP (110015) – Staff terminal with RFID IP ACRIOS
TP RFID N IP (110016) – Wall staff terminal with RFID IP ACRIOS -  wall-mounted version

Staff identification: For versions equipped with an RFID module, RFID cards (110500, 110501) are used for staff registration and presence tracking.

The power supply can be reinforced using the Power adapter TP (ATP 110871) connected via the ZE IP element.

The Signaling staff terminal IP is available in both wall-mounted and desktop versions. It is designed for system decentralization within an IP signaling system configuration. The unit enables the interconnection of up to 4 wards and it is equipped with a call mute button.

Functional options:

• Interconnection of up to 4 wards for centralized signaling.
• Independent registration for each individual system.
• Real-time alarm reception from connected systems.
• Caller identification on the integrated display.
• Call muting, while keeping the call active until a nurse registers in the patient's room.

Technical specifications:

Dimensions: 150mm x 86mm x 27mm

The unit is designed for staff use, enabling call reception and communication within the MDC V04 IP system.

Functional options:

• Receiving calls from the MDC V04 IP system.
• Integrated phone book within the MDC V04 IP system.
• Option to send addressed call requests to individual devices within the MDC V04 IP system.
• Definition of staff roles for the application (nurse, doctor, auxiliary staff).
• Secure user account and password for authorized access to the MDC V04 IP system.
• Ward combining functionality.
• Caller identification on a graphic display.
• Electric door lock control.
• Call reception activation toggle via in-app staff presence.
• Application holder identification.

Technical specifications:

Dimensions: 80mm x 170mm x 10mm

The Wireless staff unit IP consists of a base station and a handset.

The base station provides core communication with the wireless handset, manages LAN communication via a router or switch, and enables telephone calls through the PSTN (public switched telephone network). The base station's range is limited to 50 m within buildings; activating Eco Mode further reduces this range. Power is supplied from the MediCall system backbone via a power stabilizer included in the set. The handset is the receiving device that establishes a voice connection with the base station. A charger is included with the handset. The Wireless staff unit IP is a standard portable telephone connected to the system through the base station. It is suitable for staff rooms or any workstation equipped with the Staff terminal IP. This unit allows staff to move freely within the base station's range while maintaining immediate availability for care and assistance. The range of the Gigaset base station can be extended using the Repeater for BSJ IP (110601) to cover areas where reception was previously unavailable. All handset functions remain fully available within this extended coverage area, identical to the base station operation.

Functional options:

• Available in versions for nurses or doctors.
• Option to connect to multiple independent systems.
• Separate registration for each system.
• Ability to send call requests to individual systems.
• Alarm reception from individual systems with the option to establish a voice connection.
• Voice communication with all system components or combined systems in joint operation.
• Simultaneous direct connection to the PSTN.

Technical specifications:

Expansion:

OBSJ (110601) Repeater for BSJ IP– Used to extend the range of the Gigaset base station.

This unit enables signal transmission from the MediCall system. Information is transmitted in text format to the client’s text pager.

Pager base station IP functional options:

• Ethernet interface for sending messages via a web form.
• Support for sending messages via the RS232c serial interface.
• 14 inputs for switching contacts (automatic message dispatch upon contact closure).
• Adjustable transmitter power 1–5 W.

Transmission frequencies:

   VHF: 138–143 MHz, 143–151 MHz, 151–159 MHz, 159–167 MHz, and 167–174 MHz.
   UHF: 448–452 MHz, 452–456 MHz, 456–460 MHz, 460–464 MHz, and 464–468 MHz.

Text pager functional options:

• Highly durable housing made of thick-walled plastic.
• 2- or 4-line alphanumeric display.
• 8 addresses (e.g., 1 individual and 7 group addresses).
• Memory for 50 messages (up to 512 characters each).
• Acoustic and vibration signaling.
• Powered by a standard AA battery or rechargeable battery; operating time up to 80 days.

Operating frequencies:

VHF: 138–143 MHz, 143–151 MHz, 151–159 MHz, 159–167 MHz, and 167–174 MHz.
UHF: 448–452 MHz, 452–456 MHz, 456–460 MHz, 460–464 MHz, and 464–468 MHz.

Technical specifications:

Dimensions PU: 200mm x 140mm x 60mm

Dimensions PT: 70mm x 49mm x 19mm

Required components:

PT IP (110680) – Text Pager

Expansion:

OPP IP (110675) – Control panel of pager IP

Dimensions: 150mm x 86mm x 27mm

This component transmits four preset messages to individual pager units or group of pagers. The messages are configured directly in the pager base station. The component operates only in conjunction with the pager base station.

Dimensions: 150 mm x 86 mm x 27 mm

This wall-mounted device  is designed for system decentralization and it is ideal for intensive care units or wards requiring constant nursing supervision. Calls from these beds are prioritized and transmitted specifically to this unit. If a call is not cleared within a pre-set time, it is automatically redirected to the rest of the system.

Functional options:

• Configurable modes for nurses, doctors, auxiliary staff, or combined roles.
• Registration and tracking for up to three independent wards.
• Direct voice communication requests to individual wards via the handset's numeric keypad.
• Alarm reception from separate wards with an optional voice connection.
• Voice communication with all communication devices across the system or within interconnected wards.
• Visual identification of the caller on the graphic display.
• Central announcement activation.
• Electric door lock control.
• Master unit mode for centralized call routing.

Technical specifications:

Dimensions:
54mm x 200mm x 28mm (handset)
150mm x 86mm x 45mm

The unit is designed for staff use, enabling call reception and communication within the MDC V04 IP system.

Functional options:

• Receiving calls from the MDC V04 IP system.
• Integrated phone book within the MDC V04 IP system.
• Option to send addressed call requests to individual devices within the MDC V04 IP system.
• Definition of staff roles for the application (nurse, doctor, auxiliary staff).
• Secure user account and password for authorized access to the MDC V04 IP system.
• Ward combining functionality.
• Caller identification on a graphic display.
• Electric door lock control.
• Call reception activation toggle via in-app staff presence.
• Application holder identification.

Technical specifications:

Dimensions: 80mm x 170mm x 10mm

The Wireless staff unit IP consists of a base station and a handset.

The base station provides core communication with the wireless handset, manages LAN communication via a router or switch, and enables telephone calls through the PSTN (public switched telephone network). The base station's range is limited to 50 m within buildings; activating Eco Mode further reduces this range. Power is supplied from the MediCall system backbone via a power stabilizer included in the set. The handset is the receiving device that establishes a voice connection with the base station. A charger is included with the handset. The Wireless staff unit IP is a standard portable telephone connected to the system through the base station. It is suitable for staff rooms or any workstation equipped with the Staff terminal IP. This unit allows staff to move freely within the base station's range while maintaining immediate availability for care and assistance. The range of the Gigaset base station can be extended using the Repeater for BSJ IP (110601) to cover areas where reception was previously unavailable. All handset functions remain fully available within this extended coverage area, identical to the base station operation.

Functional options:

• Available in versions for nurses or doctors.
• Option to connect to multiple independent systems.
• Separate registration for each system.
• Ability to send call requests to individual systems.
• Alarm reception from individual systems with the option to establish a voice connection.
• Voice communication with all system components or combined systems in joint operation.
• Simultaneous direct connection to the PSTN.

Technical specifications:

Expansion:

OBSJ (110601) Repeater for BSJ IP– Used to extend the range of the Gigaset base station.

This unit enables signal transmission from the MediCall system. Information is transmitted in text format to the client’s text pager.

Pager base station IP functional options:

• Ethernet interface for sending messages via a web form.
• Support for sending messages via the RS232c serial interface.
• 14 inputs for switching contacts (automatic message dispatch upon contact closure).
• Adjustable transmitter power 1–5 W.

Transmission frequencies:

   VHF: 138–143 MHz, 143–151 MHz, 151–159 MHz, 159–167 MHz, and 167–174 MHz.
   UHF: 448–452 MHz, 452–456 MHz, 456–460 MHz, 460–464 MHz, and 464–468 MHz.

Text pager functional options:

• Highly durable housing made of thick-walled plastic.
• 2- or 4-line alphanumeric display.
• 8 addresses (e.g., 1 individual and 7 group addresses).
• Memory for 50 messages (up to 512 characters each).
• Acoustic and vibration signaling.
• Powered by a standard AA battery or rechargeable battery; operating time up to 80 days.

Operating frequencies:

VHF: 138–143 MHz, 143–151 MHz, 151–159 MHz, 159–167 MHz, and 167–174 MHz.
UHF: 448–452 MHz, 452–456 MHz, 456–460 MHz, 460–464 MHz, and 464–468 MHz.

Technical specifications:

Dimensions PU: 200mm x 140mm x 60mm

Dimensions PT: 70mm x 49mm x 19mm

Required components:

PT IP (110680) – Text Pager

Expansion:

OPP IP (110675) – Control panel of pager IP

Dimensions: 150mm x 86mm x 27mm

This component transmits four preset messages to individual pager units or group of pagers. The messages are configured directly in the pager base station. The component operates only in conjunction with the pager base station.

Dimensions: 150 mm x 86 mm x 27 mm